Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Other
– Economy level forged alloy seat post clamps for BMX and cruiser bikes with 1″ / 25.4mm seat posts
– Clamp Size: 25.4mm
– Material: Alloy
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. – CNC machined 6061 aluminum – Black anodized finish – Includes (1) M8 Chainring Bolt (Long – Bolt Only)
$0.99
• Designed to keep dust and dirt out of V-Brake cable/housing systems
$1.00
Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit.
– Composite construction
$1.50 – $2.00
– Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
– Uses standard chain pin connector and tool
$1.50
– For MTB levers
– 7mm x 1mm
– Aluminum construction
$1.98 – $16.28
– Allows quick chain removal without tools
– MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~|
– MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~|
– MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~|
– MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~|
– MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~|
– MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~|
– MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$1.99
Stainless steel pedal washers
– Sold in pairs
$2.00
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers.
– Covers brake hose fitting at the brake lever
$2.00
– Replacement retaining clip for the Surly Tuggnut/Snuggnut
$2.50
Use to create your desired chain length in single-speed applications. Only one half link is needed.
– Non-reusable
– Width: 9.4 mm
– Drivetrain Speeds: 1
– Color: Black
– Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
$2.50
The Gyro G3 upper top plate is designed for use with the G3 detangler.
$2.99
Product details
– Use in chainstay pocket to seal sensor into frame
$3.00
Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit
$3.00
Shimano Front Derailleur Cable Fixing Assembly
$3.00
– Use: Brake
– Length: 30mm
– Diameter: 5mm
$3.00
– QR adapter washer for the Surly Tuggnut/Hurdy/Snuggnut
$3.00 – $23.75
You have to get that handlebar height just right. It’s more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be.
– Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size
$3.50 – $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right.
– Made from Aluminum, anodized or polished finish, without logos
– 1-1/8″ Diameter
– S.H.I.S. Stem Clamp Diameter: 28.6mm
$3.60
Strain relief for servicing RockShox Reverb hydraulic lines.
– Fits all generations of Reverb
$3.99
• Fits all Trek kids’ bikes
• Super-strong steel derailleur guard
$3.99
Weight-savings is no excuse to have an ill-fitting cockpit. Shave every possible gram with these Carbon Headset Spacers from FSA, and ensure your bike fit is right on the money.
$4.14
A new stet of post keys for your RockShox Reverb tightens up any rotational slop that may develop normally with use.
– Fits all generations of Reverb and Reverb Stealth
– Brass Key sizes are defined by the number of lines on the key. (Zero lines means a “Size 0” key, 3 lines means a “Size 3” key.)
$4.20
– Replacement pull-up spring for the Surly Chain Tensioner
$4.20
Replacement push-down spring for the Surly Chain Tensioner
$4.75 – $16.50
Grade 300 retainer bearings for headset and bottom bracket service. – 10 Retainers/Bag
$4.99
It seems so small and insignificant, yet it’s so important. The BB30 Wave Spring Washer is the keystone in your bottom bracket assembly, providing compression for proper setup and bearing preload, while helping to maintain adjustment after it’s dialed in just right. They’re also quite easy to lose or damage, so grab a few while you’re at it.
$4.99 – $5.99
Hardware is specifically designed for, and only compatible with, Salsa frames using the Alternator 2.0 dropout system.
– For use on 2017 and newer alternator 2.0 Adjustable plates only
– Please reference hardware kit FS2351 for fixed position plates
– Please reference hardware kit FS2350 for adjustable plates
$4.99
Frame Plugs for Internal Cable Routing
$4.99
• With bolt & nut
• 1 1/8-inch = 28.6mm
• 1-inch = 25.4mm
Page 1 of 22